How to Use

Check out the Plenty vaporizer
The power cord on the Plenty Vape is very long, not constricting you to one place.

Step 1: Turn on the Plenty Vape

First plug the Plenty in, of course, and then switch the power button on the left hand side of the Plenty to the on position. You’ll see the light glow orange letting you know the Plenty is ready for your demands.

Level 4 is a good starting point, go up for thicker vapor and down for thinner/cooler vapor.

Step 2: Set the Plenty Vape’s temperature

Now you can select a heat level from 1 to 7 to pick your desired temperature. I suggest starting around heat level 4 so you can get a feel for the mid way point and then know if you need a higher or lower temperature.

The top to the her chamber has the cooling coil/whip connected to it and easily twists on and off.

Step 3: Pack the Plenty Vape herb chamber

Now take the herb chamber and twist it open to reveal the screen. I’ve found that loading the chamber heavy with material gets you very thick and smooth vapor, so cover the entire screen with your material. Now close it up and wait for the Plenty to reach temperature, if it hasn’t already.

The herb chamber is pretty big, don’t be afraid to pack it full before reattaching the mouthpiece.

Step 4: Attach the herb chamber onto the Plenty Vape

Once you see the orange light under the temperature gauge go off you know the Plenty is heated up and ready to go. Take the herb chamber and twist it back onto the top of the Plenty.

The whip easily rotates so you can position the mouthpiece in the most comfortable way possible.

Step 5: Begin use of the Plenty Vape

Now you are all set to take your first pull. Like I mentioned before you don’t want to draw really hard because you are going to be surprised at how fast and easy the Plenty Vaporizer delivers vapor. Make sure you keep the trigger held down when you are using the Plenty so it doesn’t begin to cool down on you.

Check out the Plenty vaporizer
Be Sociable, Share!

Reviews and Info